ESD
China
 English 繁体 最近信息 静电产品 静电标准 培训服务 ESD专家 静电应用 静电测量 ESD防护 业务产品销售咨询

ESD产品

静电测量

防护用品

售后服务

ESD测试

工厂ESD

设备ESD

元件ESD

ESD问题

业务:产品销售咨询
技术产品技术咨询

English

 

静电信息

静电产品

 

静电驻极,过滤效率不到20提升到95

静电驻极中如何注入更多的电荷,从而提高熔喷布的过滤效率?

 

EST712C静电驻极N95口罩布熔喷布无纺布静电驻极机静电驻极棒 (高效、易安装)

静电驻极N95口罩布熔喷布无纺布静电驻极机静电驻极棒

无锡常州客户使用EST712C静电驻极机的使用效果

静电应用

静电吸附

静电分选

大气静电


静电测试

ESD试验

静电防护

ESD培训

静电标准

劳保世界

ESD试验

 

ESD模型

 

静电标准


ESD问题
 

如何速查
本站

1997 EOS/ESD Symposium

 Santa Clara, CA

Table of Contents

Session 1A: Compound Semiconductor ESD Issues

Session Moderator: Karlheinz Bock, IMEC

1A.1 ESD Issues in Compound Semiconductor High-Frequency Devices and Circuits, K. Bock, IMEC, p1.

1A.2 Gate Burnout of Small Signal MODFETs at TLP Stress, V. Vashchenko, V. Sinkevitch, SRI Pulsar; J. Martynov, SRPC Istok, p13.

1A.3 Influence of the Device Geometry and lnhomogeneity on the Electrostatic Discharge Sensitivity of InGaAs/InP Avalanche Photodetectors, H-C Neitzert, V. Cappa, R. Crovato, CSELT, p18.

1A.4 Novel Concept for High Level Overdrive Tolerance of GaAs Based FETs, K.-M. Lipka, P. Schmid, M. Birk, B. Splingart, E. Kohn, J. Schneider, H. Heinecke, University of Ulm; M. Demmler, P. Tasker, Fraunhofer lnstitut Freiburg, p27.

Session 1B: Factory Issues and EOS/ESD Materials Technology

Session Moderator: Donna Robinson-Hahn, Lucent Technologies

1B.1 Procedures for the Design, Analysis and Auditing of Static Control Flooring/Footwear Systems, L. Fromm, Hewlett Packard; W. Klein, K&S Laboratories; S. Fowler, Fowler Associates, p33

1B.2 Non-Particulate Static Dissipative Polymers Used in Wafer Handling Equipment, W. Tan, Advanced Micro Devices, p49.

1B.3 PAPER WITHDRAWN

1 B.4 General EOS/ESD Equation, J. Smith, Lockheed Martin Advanced Technology Center, p59.

1B.5 Analysis of ESD Glove Use, G. Baumgartner, Lockheed Martin Missiles and Space, p68.

Sesion 2A: System Level ESD Issues

Session Moderator: Masamitsu Honda, Impulse Physics Laboratory

2A.1 ESD Entrypoints: Coaxial Cables vs. Shielding Apertures, S.Van den Berghe, D. De Zutter, University of Ghent, p76.

2A.2 ESD Sources Pinpointed by Analysis of Radio Wave Emissions, J.Bernier, G. Croft, R. Lowther, Harris Semiconductor, p83.

2A.3 A Robust ESD Event Locator System With Event Characterization, D. Lin, L. DeChiaro, M-C. Jon, Lucent Technologies/Bell Laboratories, p88.

2A.4 An Analysis of the Fields on the Horizontal Coupling Plane in ESD Testing, S. Frei, Technical University of Berlin; D. Pommerenke, Hewlett Packard, p99.

2A.5 Fast Fourier Transform Analysis of Published ESD Waveforms and Narrowband Frequency Domain Measurement of Human ESD Events, T. Lo, P. Alexander, University of Windsor; S. Wong, PQT Systems, p107.

2A.6 About the Different Methods of Observing ESD, S. Frei, Technical University of Berlin; D. Pommerenke, Hewlett Packard, p117.

2A.7 Methodology to Simulate Speed of Approach in Electrostatic Discharge (ESD), W. Greason, University of Western Ontario, p125.

2A.8A Measurements of Body Impedance for ESD, Z. Wu, J. Huang, S. Liu, Institute of Applied Electrostatics, p132.

2A.8B Why the Human Body Capacitance is So Large, J. Huang, Z. Wu, S. Liu, Institute of Applied Electrostatics, p135.

Session 2B: Factory and ESD Control Issues

Session Moderator: Lou DeChiaro, Lucent Technologies

2B.1 Mitigating Electrostatic Discharge (ESD) in Solid C02 Pellet Cleaning of Printed Wiring Boards and Assemblies, M. Jon, P. Read, T. Welsher, Lucent Technologies Inc., Bell Laboratories; H. Nicholl, Lucent Technologies, Inc., p139.

2B.2 Mathematical Modeling of Electrostatic Propensity of Protective Clothing Systems, J. Gonzalez, S. Rizvi, E. Crown, P. Smy, University of Alberta, p153.

2B.3 Control of Static Charge on Personnel in an Electronics Working Area, A. Fujie, Kaijo Corporation; H. Uchida, A. Iwasaki, T. Numaguchi, Sumitomo, 3M/Ltd. p163.

2B.4 Grounding Personnel via the Floor/Footwear System, R. Gaertner, K. Helling, G. Biermann, E. Bradza, R. Haberhauer, W. Koehl, R. Mueller, W. Niggemeier, B. Soder, Siemens AG, p170.

2B.5 ESD Control and ISO 9000, J. Kolyer, C. Ramer, W. Williams, Boeing North American, Inc., p176.

2B.6 ESD Program Auditing: The Auditor's Perspective, T. Theis, W. McFarland, R. Brin, Lucent Technologies, p188.

2B.7 PAPER WITHDRAWN

2B.8 Comparison of Germanium and Silicon Needles as Emitter Electrodes for Air Ionizers, C. Noll, ITW Static Control and Air Products, SIMCO Static Control and Cleanroom Products; P. Lawless, Research Triangle Institute, Center for Engineering and Environmental Technology, p195.

Session 3A: Design of ESD Protection Circuits

Session Moderators: Jeremy C. Smith, Motorola, and Andy Walker, Cypress

3A.1 What Every ESD Engineer Needs to Understand About Patents (invited Paper), I.Matsil, Texas Instruments, Inc. p205.

3A.2 Dynamic Threshold Body- and Gate-Coupled SOI ESD Protection Networks, S. Voldman, F. Assaderaghi, J. Mandelman, L. Hsu, G. Shahidi, IBM, p210.

3A.3 On the Use of N-Well Resistors for Uniform Triggering of ESD Protection Elements, G. Notermans, Philips Semiconductors, p221.

3A.4 PAPER WITHDRAWN

3A.5 Design Methodology for Optimizing Gate Driven ESD Protection Circuits in Submicron CMOS Processes, J. Chen, A. Amerasekera, C. Duvvury, Texas Instruments, Inc. p230.

3A.6 Study of the ESD Behaviour of Different Clamp Configurations in a 0.35 um CMOS Technology, C. Richier, G. Mabboux, SGS-Thomson; N. Maene, R. Bellens, Alcatel Telecom, p240.

3A.7 Protection of High Voltage Power and Programming Pins, T. Maloney, K. Parat, N. Clark, A. Darwish, Intel Corporation, p246.

3A.8 A Study of ESD Protection Devices for Input Pins: Discharge Characteristics of Diode, Lateral-Bipolar and Thyristor under MM and HBM Tests, H. Ishizuka, K. Okuyama, K. Kubota, M. Komuro, Y. Hara, Hitachi Microcomputer System, Ltd. (Best Paper RCJ EOS/ESD Japan 1996), p255.

Session 3B: ESD Considerations Beyond Microelectronics

Session Moderator: Joe Bernier, Harris Semiconductor

3B.1 Clean Room ESD Packaging Overview, J. Neteler, Richmond Technology, Inc. p263.

3B.2 Measurement of Cleanroom Fabric Surface Resistivities, D. Cooper, R. Linke, The Texwipe Company, p271.

3B.3 The Antistatic Performance of Cleanroom Clothing - Do Tests on the Fabric Relate to the Performance of the Garment Within the Cleanroom?, M. Dyer, DuPont, p276.

3B.4 Particle Generation of Ceramic Emitters for Cleanroom Air Ionizers, K. Okano, A. Posadas, Polytechnic University, p287.

3B.5 Electrostatic Concerns in the Graphic Arts Industry, M. Swiecicki, Static Solutions, Inc. p292.

3B.6 Static Control Technology Preserves Ancient Egyptian Artifacts, A. Steinman, Ion Systems, Inc., p298.

3B.7 Shock in the Shower, D. Swenson, 3M/Electrical Specialties Division, p303.

Session 4a: Component Level ESD Phenomena

Session Moderators: A. Amerasekera and M. Chaine, Texas Instruments, Inc.

4A.1 Influence of Well Profile and Gate Length on the ESD Performance of a Fully Silicided 0.25 lim CMOS Technology, K. Bock, C. Russ, G. Badenes, G. Groeseneken, L. Deferm, IMEC, p308.

4A.2 ESD Robustness and Scaling Implications of Aluminum and Copper Interconnects in Advanced Semiconductor Technology, S. Voldman, IBM Microelectronics Division, p316.

4A.3 Electrical Filamentation in GGMOS Protection Structures, V. Vashchenko, V. Sinkevitch, SRI Pulsar; J. Martynov, SRPC Istok, p330.

4A.4 An Attempt to Explain Thermally Induced Soft Failures During Low Level ESD Stresses: Study of the Differences Between Soft and Hard NMOS Failures, P. Salome, C. Leroux, D. Mariolle, D. Lafond, G. Reimbold, LETI CEA Technologies; J. Chante, CEGELY, ECPA-INSA; P. Crevel, MATRA MHS , p337.

4A.5 Unique ESD Failure Mechanisms During Negative to Vcc HBM Tests, M. Chaine, S. Smith, A. Bui, Texas Instruments, Inc. p346.

4A.6 Prediction of ESD Protection Levels and Novel Protection Devices in Thin Film SOI Technology, P. Raha, E. Rosenbaum, University of Illinois; J. Smith, J. Miller, Motorola, p356.

4A.7 Does the ESD-Failure Current Obtained by Transmission Line Pulsing Always Correlate to Human Body Model Tests?, W. Stadler, X. Guggenmos, Siemens AG; P. Egger, H. Gieser, C. Musshoff, Fraunhofer Institute for Solid State Technology, p366.

Session 4B: ESD Issues in MR Head Technologies

Session Moderator: Al Wallash, Quantum

4B.1 Decay-Time Characterization of ESD Materials for Use with Magnetoresistive Recording Heads, C. Lam, C. Chang, Read-Rite Corporation, p373.

4B.2 Field-induced Breakdown ESD Damage of Magnetoresistive Recording Heads, A. Wallash, Quantum Corporation; M. Honda, Impulse Physics Laboratory, Inc., p382.

4B.3 Characterization of ESD Damaged Magnetoresistive Recording Heads, C. Lam, E- A Salhi, S. Chim, Read-Rite Corporation, p386.

4B.4 "Direct Charging" Charge Device Model Testing of Magnetoresistive Recording Heads, T. Cheung, Applied Magnetics Corporation, p398.

4B.5 Three-Dimensional Transient Simulation of Magnetoresistive Head Temperature During an ESD Event, C. Chang, Seagate Technology, Inc. p405.

4B.6 Effects of Unbalanced Ionizers on Magnetoresistive Recording Heads, H. Snyder, Technical Consulting Associates; A. Wallash, Quantum Corporation, p412.

Workshop Session A

Workshop Chairman: Jim Colvin, WSI

WA.1 ESD Control Program - Audit Problem, Moderator: L. Fromm, Hewlett Packard, p417.

WA.2 System Level ESD Issues, Moderator: M. Hopkins, Thermo Voltek Corporation, p418.

WA.3 Failure Analysis, Moderator: D. Lin, Lucent Technologies, p419.

Workshop Session B

Workshop Chairman: Jim Colvin, WSI

WB.1 Standards Demonstrations, Moderator: C. Zander, Restronics Company, p420.

WB.2 Electrostatic Considerations in Cleanrooms, Moderator: A. Steinman, Ion Systems, p421.

WB.3 On Chip Protection, Moderator: T. Maloney, Intel Corporation, p422.

WB.4 ESD Issues With AMR and GMR Recording Heads, Moderator: C. Newberg, Western Digital, p423.

 

最近信息   更多>>

最近ESD培训计划
美国第36届ESD 年会

美国EsdEmc公司热烈庆祝EMC2014 6月17-19日在北京国际会议中心召开

 

 

静电产品   更多>>

系统、整机ESD测试

±20kV静电放电发生器

±30kV静电放电发生器

 

电子元器件ESD测试

电子元器件ESD敏感度分类

HBM人体模型ESD模拟

HBM/MM静电放电模拟器 (0~±20kV)(通用)
HBM/MM/CDM静电放电模拟器 (0~±20kV)
CDM静电放电模拟器 (0~±20kV)

 

工厂级ESD测试

离子风机测试仪(±1kV±5kV)

 

静电电压测量类

防爆静电电压表(低价格通用)

静电动态计算机监测(多通道电脑存储)

静电电荷量测量类

数字电荷量仪(推荐 通用型)
数字电荷皮库表(极灵敏型)
数字电量表(低价格)
数字电量表(大电量)

高电阻或超高阻测量类

数字高阻计(低价格)
超高阻微电流测量仪(推荐)
人体综合电阻测试仪
防静电鞋、导电鞋测量仪
导电和防静电材料电阻率测量(宽范围)

微电流或超微弱电流测量类

皮安飞安电流表
数字超高阻、微电流测量仪 推荐

 

静电发生器、高压直流电源

袖珍正负静电发生器

EST801静电发生器(0 ~ +8kV)
静电发生器 (0-20kV)
价格静电发生器(0 ~80kV)
大电流静电发生器(5mA以上)
高精度静电发生器(EST705)

双极性高精度电发生器(0~±20kV、±30kV、±50kV)

 

 

 

静电应用   更多>>

静电吸纸覆纸设备
节能环保型静电分选机
静电放电棒

人体静电表演装置

静电放电(ESD)发生器(模拟器、放电枪)校对装置

静电电压表计量装置
多通道大气静电场强测试仪

静电吸附  静电分选

 

劳保世界>>

 

技术支持与服务

国际认证ESD工程师来了,您准备好了吗?

美国、日本ESD专家授课,高水平ESD培训课程。

您能理解和区分两个最常用ESD标志吗?

导电、防静电塑料、橡胶体积电阻率测试 EST991

定做特殊专用静电产品

培训&认证  更多>>

ESD-china 课程特点IEC61340-5-1静电防护体系认证咨询培训辅导
高水平授课方式的ESD培训ANSI/ESD S20.20认证咨询

充分理解S20.20标准的要求

AC电阻测试

认证咨询辅导的有关问题 FAQ

往期培训回顾

 

ESD-china优

 

联系我们更多>>

 

业务电话:

010-⑥③⑤②,⑧②⑤④

010-⑥③⑤②,⑧②⑥④

010-
⑥③⑤①,②⑥⑦⑧

北京时间:周一至周五:
8:30~12:00, 13:30~17:30

传真1:⑥③⑤②,④⑦⑨⑧

传真2:⑥③⑤①,②⑥⑦⑧
 

投诉与建议:010-6358.0337

销售咨询1:产品销售咨询

销售咨询2:产品销售咨询

技术咨询产品技术咨询


   

 

静电驻极,过滤效率不到20提升到95

静电驻极中如何注入更多的电荷,从而提高熔喷布的过滤效率?

 

EST712C静电驻极N95口罩布熔喷布无纺布静电驻极机静电驻极棒 (高效、易安装)

静电驻极N95口罩布熔喷布无纺布静电驻极机静电驻极棒

无锡常州客户使用EST712C静电驻极机的使用效果

ESD-china静电信息网   亿艾迪(ESD)(产品)  华晶汇(HJH)(技术)  主要客户  汇款帐号
联系我们010-6358.0337  6352.8264,  6352.8254   6351.2678  (周一至周五:8:30-12:00, 13:30-17:30)
 业务联系::产品销售咨询       :产品销售咨询     技术支持:产品技术咨询
地址:北京市西城区亚泰中心,传真1:⑥③⑤②.④⑦⑨⑧,  传真2:⑥③⑤①,②⑥⑦⑧ 
  最近更新:2020-05-29 有问必答电子邮  版权所有©复制必究1997-2019
 
关于或联系我们:email:   About ESD-china  网站地图