Model EST802 ESD Simulator, ESD Generator, ESD Gun

Electrostatic discharge (ESD) immunity test is one of the most important tests in the electromagnetic compatibility (EMC) tests. The International Electrical Committee (IEC) published IEC61000-4-2 (Chinese national standard GB17626.2) for ESD test of the electronic system testing. The Model EST802 ESD Generator (ESD Simulator or ESD gun) can be continuous adjusted electrostatic discharge pulses voltage from 0 to ±20KV in both air and contact discharge operations. Exceeding industry ESD test standards requiring pulse voltages of 8kv (contact)/15 kV(air). Basic model is supplied with 150 pF/330 ohm network in compliance with IEC/EN 61000-4-2,IEC 1000-4-2 and IEC 801-2 / 1991, and other optional extra discharge networks is available The EST802 consists of an adjustable high voltage control unit and a hand-held pulse discharge gun (less than 500g, the world most Light weight gun) connected by a 4-ft cable. The control unit houses the low voltage power supply (24V) and both very precision (0.5%) positive and negative adjustable high voltage (±20kV/1mA) power supply with high voltage LED display. Contact & air discharge voltage ranges from 0 to±20kV, 3 1/2-digit LED readout, 10-volt resolution to 20kV. Pre setted10 standard discharge voltage levels enable the user to quickly select the voltage from the standard test levels as the IE 6100-4-2 standard and air and contact discharge mode. Discharge Polarity can be alternated with the + o - switch at any time during the operation. It is the world most Light weight gun, It is comfortable ergonomics designed. Basic RC network is 330 ohm/150pf (HBM) (IEC61000-4-2 Std. GB17626.2) and Optional Custom RC networks available. EST802 can be applied to a wide range of test standards. Test in accordance with IEC, European, North American and China ESD/EMC simulation /Generation standards